Multifunctional Automobile Emergency Starting Power Clamp Wire EC5 Battery Clamp Fire Newman Power anti Reverse Charging Clamp

Precautions for use of clip

Please operate in strict accordance with regulations)

0 The vehicle cannot be started continuously or the key cannot be turned on (the continuous ignition time is less than 3 seconds), and the interval between each start is more than 30 seconds.

2 Remove the clip within 30 seconds after starting the car

3. The positive and negative poles cannot be reversed, and two clips cannot be connected for short circuit

Violation of the above three points may cause the [fuse box] of the clip to burn out. Please pay attention to the operation method. Newman all-series emergency starting power supply is universal. For special models and brands, please contact customer service

Anti-insertion design

Only the matching plug can be inserted into the starting power supply

Red is connected to the positive pole of the car battery Black is connected to the negative pole of the car battery

The red clip (positive pole) and the black clip (negative pole) are not allowed to collide with the metal part

Anti-insertion DO interface

DO anti-back-plug design, protect your car and power supply with strong anti-oxidation ability, stable current and strong conductivity.

The first step is to connect the red clip of the car battery and clip it to the positive pole of the car battery

Do not connect the battery clamp with the positive and negative poles of the car battery

If the positive and negative electrode joints of the old battery are seriously oxidized, scrape the oxide layer first and then clamp it up